74HC4316DB,112
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4316 |
| Pin Count | 16 |
| Operating Supply Voltage | 2.5V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1nA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 205 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 220 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 135Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 16ns, 16ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 37ns |
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HC4316DB,112 Overview
Due to its 16-SSOP (0.209, 5.30mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tube is used. It is mounted in the position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. An extended operating temperature of -40°C~125°C TA degrees Celsius. 16 terminations have been made so far. Due to its 1 channels, the electrical component produces high-quality output. In the case of a voltage supply of 6V volts, the electrical part can be powered up and run. The electronic part body is injected with 16 pins. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching for 74HC4316 variants of the analog switch ic. The internal resistance of this digital multiplexer is 240Ohm. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 10V. Analog switch ics with Dual, Single supply type are cost-effective. In order for the electronic part to function properly, the lowest voltage should be 2V. For this digital switch to work, 1nA current would suffice. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. A dual power supply should have at least 1V voltage attached. A voltage of 2.5V can be used to operate the electronic component. In order to operate the 4 inputs, there are several steps to follow.
74HC4316DB,112 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HC4316DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4316DB,112 Analog Switches & Multiplexers ICs applications.
- Video signal routing
- Medical systems
- Data Acquisition Systems
- Wireless Local Loop
- ATM
- Avionics
- Fiber In The Loop (FITL)
- HDTV
- Private Branch Exchange (PBX)
- PCMCIA cards
