74HC4316DB,118
| Parameters | |
|---|---|
| Dual Supply Voltage | 2.5V |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 16ns, 16ns |
| Channel-to-Channel Matching (ΔRon) | 6Ohm |
| Crosstalk | -60dB @ 1MHz |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SSOP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 240Ohm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Max Power Dissipation | 500mW |
| Base Part Number | 74HC4316 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Channels | 4 |
| Number of Circuits | 4 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1nA |
| Nominal Supply Current | 320μA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 205 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 220 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 135Ohm |
| Min Dual Supply Voltage | 1V |
| High Level Output Current | 25mA |
74HC4316DB,118 Overview
The electrical component comes in 16-SSOP (0.209, 5.30mm Width) packaging, which makes it convenient to ship overseas. High reliability is ensured by the advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. 1:1 is the number of circuits in the multiplexer and demultiplexer. Operating temperature around -40°C~125°C TA extended. A high-quality output is provided by the electrical component's 4 channels. On the other hand, analog switches can be constructed using SPST - NO switching circuits. Circuits number 4 make up this analogue multiplexer. Using the 74HC4316 search parameter, you can discover variants of the switch. Internally, this switch multiplexer has a resistance of 240Ohm. Datasheets for functions of 16 pins are available. In a normalsituation, users should not supply the switches with voltage higher than 10V. Dual, Single supply type digital switch with a low cost. It is recommended to use 2V as the lowest voltage for the electrical part. For this multiplexer to operate, 1nA current would be sufficient. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5V. If you are using dual power supplies, you should attach at least 1V. 5V operating voltages can be used with this electrical part. Operating the 4 inputs requires 4 inputs. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer. In this digital multiplexer, there are 4 outputs. There is a 16-SSOP package available from suppliers.
74HC4316DB,118 Features
4 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HC4316DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC4316DB,118 Analog Switches & Multiplexers ICs applications.
- HDTV
- Automotive applications
- Communications systems
- E1 Multiplexer
- Audio and video signal routing
- Medical systems
- SONET/SDH ADM
- Sample-and-hold systems
- Wireless Local Loop
- Transmit
