74HC4316PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 240Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4316 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Channels | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 1nA |
| Power Dissipation | 500mW |
| Turn On Delay Time | 205 ns |
| Number of Inputs | 4 |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Turn-Off Delay Time | 220 ns |
| Max Dual Supply Voltage | 5V |
| -3db Bandwidth | 160MHz |
| On-State Resistance (Max) | 135Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 9Ohm |
| Switch Circuit | SPST - NO |
| Switch Time (Ton, Toff) (Max) | 16ns, 16ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Switch-on Time-Max | 35ns |
| Switch-off Time-Max | 37ns |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4316PW,118 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 1:1. Around -40°C~125°C TA is the extended operating temperature. 16 terminations have been made so far. This electronic part offers high-quality output due to its 1 channels. Powered by a 6V voltage supply, the electrical part should be switched on and run. This electronic part can be found in the 16 series. Based on SPST - NO switching circuits, these analog multiplexers work. If you are looking for variants of the digital switch, trying search with 74HC4316. A 240Ohm internal resistance characterizes this multiplexer. The datasheets for the 16 pins explain the functions. In normalcircumstances, users should not exceed 10V volts for the multiplexer. Dual, Single supply type digital switch with a low cost. In order for the electronic part to function properly, the lowest voltage should be 2V. An operating current of 1nA would be sufficient for this switch device. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. There is a voltage range of 5V operating voltages for the electrical part. It is possible to operate 4 inputs.
74HC4316PW,118 Features
1 Channels
Switch Circuit: SPST - NO
1nA Supply Current
-3db Bandwidth: 160MHz
74HC4316PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4316PW,118 Analog Switches & Multiplexers ICs applications.
- Switching Systems
- Avionics
- Communication systems
- Automotive applications
- Microprocessor Controlled Analog Systems
- Central office
- Isolation
- Communication systems
- Intelligent PBX
- Public switching systems
