74HC4351D,652
| Parameters | |
|---|---|
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 275 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 55ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-off Time-Max | 47ns |
| Height | 2.45mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
74HC4351D,652 Overview
The electronic component is convenient to ship overseas because it is packed in a 20-SOIC (0.295, 7.50mm Width). To ensure high reliability, a new packaging method Tube is used. This analog switch is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Operating temperature around -40°C~125°C TA extended. In total, there have been 20 terminations. The electronic part provides high-quality output because it has 8 channels. Turning on and running the electrical part should be easy with a 6V voltage supply. There is an electrical component included in the 20 series. This multiplexer is composed of 1 circuits. If you are looking for variants of the digital switch, trying search with 74HC4351. In this multiplexer, the internal resistance is 160Ohm. Please refer to the datasheets for 20 pins functions. normally, users should not supply switches with voltages higher than 10V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 2V as the lowest voltage for the electrical part. It would be sufficient to run this analogue multiplexer with 400nA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 5V. For dual power supplies, a voltage of at least 1V should be attached. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. The electronic component can function from 5V. In 170MHz-bandwidths, data can be transferred.
74HC4351D,652 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HC4351D,652 Applications
There are a lot of Nexperia USA Inc. 74HC4351D,652 Analog Switches & Multiplexers ICs applications.
- Frame Relay Equipment
- Signal routing between systems
- Cell phones
- FTTH
- Automotive applications
- Audio and video routing
- Central office
- T1/E1 Terminals
- Medical systems
- Remote Powered Equipment
