74HC4351D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Base Part Number | 74HC4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 275 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 55ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-off Time-Max | 47ns |
| Height Seated (Max) | 2.65mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4351D,653 Overview
Shipping overseas is convenient due to the electrical component's packing in 20-SOIC (0.295, 7.50mm Width). In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. A switch device like this is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 20. A high-quality output is provided by the electrical component's 8 channels. Powered by a 6V voltage supply, the electrical part should be switched on and run. An electrical component of this type can be found in the 20 series. Circuits number 1 make up this analogue multiplexer. If you are looking for variants of the digital switch, trying search with 74HC4351. Analog switches have 160Ohm internal resistance. Datasheets for 20 pin functions are available upon request. Users shouldn't supply more than 10V voltage to the switch device. The analog switch ic is of the Dual, Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 2V. It would be sufficient to run this analogue multiplexer with 400nA current. For this switch device, it is feasible to have two supplies. However, the voltage should not exceed 5V. The voltage should be at least 1V if you are using dual power supplies. This product is integrated with an analog integrated circuit (IC) of type SINGLE-ENDED MULTIPLEXER. A voltage of 5V can be used to operate the electronic component. 170MHz bandwidths enable data to be transferred.
74HC4351D,653 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HC4351D,653 Applications
There are a lot of Nexperia USA Inc. 74HC4351D,653 Analog Switches & Multiplexers ICs applications.
- Industrial control systems
- PBX interfaces
- High speed data transmission line cards
- Transmit
- Cell phones
- Audio/video switches
- ATM
- Industrial
- Cellular phones
- Switching Systems
