74HC4351DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 275 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 55ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-off Time-Max | 47ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4351DB,112 Overview
The electronic component is convenient to ship overseas because it is packed in a 20-SSOP (0.209, 5.30mm Width). High reliability is provided by advanced packaging method Tube. A switch device like this is mounted in Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. Increasing operating temperature to around -40°C~125°C TA. Total terminations are 20. As a result of its 8 channels, this electronic component provides high-quality output. If the voltage supply is 6V volts, the electrical component should be turned on and run. Electronic part bodies are injected with 20 pins. There are 1 circuits in this multiplexer. Use 74HC4351 to search for variants of the digital switches. An switch multiplexer with 160Ohm internal resistance has a value of 160Ohm. To find out what the functions of 20 pins are, please refer to their datasheets. It is generally not recommended to supply a voltage higher than 10V to the switch device in normal circumstances. Dual, Single supply type digital switch with a low cost. The lowest voltage the electronic part should receive is 2V. In order to operate this switch device, it would need a current of 400nA. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 5V. The voltage should be at least 1V if you are using dual power supplies. There is an analog IC SINGLE-ENDED MULTIPLEXER integrated with this board. 5V operating voltages can be used with this electrical part. In 170MHz-bandwidths, data can be transferred.
74HC4351DB,112 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HC4351DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC4351DB,112 Analog Switches & Multiplexers ICs applications.
- Digital cross connects (DSX-1)
- Channel Banks
- Ultrasound
- Central office
- Microprocessor controlled systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Relay Replacement
- DSLAMs
- PBX interfaces
- Automotive applications
