74HC4351DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Resistance | 160Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4351 |
| Pin Count | 20 |
| Operating Supply Voltage | 5V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Operating Supply Current | 400nA |
| Power Dissipation | 500mW |
| Propagation Delay | 4 ns |
| Turn On Delay Time | 300 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| Supply Type | Dual, Single |
| Bandwidth | 170MHz |
| Turn-Off Delay Time | 275 ns |
| Max Dual Supply Voltage | 5V |
| On-State Resistance (Max) | 120Ohm |
| Min Dual Supply Voltage | 1V |
| Dual Supply Voltage | 2.5V |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 55ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switch-off Time-Max | 47ns |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4351DB,118 Overview
Packed in 20-SSOP (0.209, 5.30mm Width), the electronic component is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. 8:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there have been 20 terminations. The electronic part provides high-quality output because it has 8 channels. With a 6V voltage supply, the electrical component should be turned on and run. An electrical component like this is included in the 20 series. There are 1 circuits in this multiplexer. Look for analog switch ic variants by searching with 74HC4351. It has an internal resistance of 160Ohm. To find out what the 20 pins do, please refer to the datasheets. normally, users should not supply switches with voltages higher than 10V. Analog switch ics with Dual, Single supply type are cost-effective. There should be 2V voltage fed to the electrical part below 2V. For this digital switch to work, 400nA current would suffice. If put voltage greater than 5V on the multiplexer, damage may be caused to the device. In the case of dual power supplies, you should connect at least 1V. It is integrated with a SINGLE-ENDED MULTIPLEXER analog IC. This electrical part is compatible with 5V operating voltages. In 170MHz-bandwidths, data can be transferred.
74HC4351DB,118 Features
8 Channels
400nA Supply Current
Bandwidth: 170MHz
74HC4351DB,118 Applications
There are a lot of Nexperia USA Inc. 74HC4351DB,118 Analog Switches & Multiplexers ICs applications.
- Avionics test equipment
- SDH
- Precision data acquisition
- E1 Multiplexer
- Data switching
- Sample hold systems
- Remote wireless modules
- Communications systems
- PBX interfaces
- Video switching
