74HC4351N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Multiplexer or Switches |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 6V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4351 |
| Pin Count | 20 |
| JESD-30 Code | R-PDIP-T20 |
| Qualification Status | Not Qualified |
| Power Supplies | 2/6V |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 55ns, 45ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Switching | BREAK-BEFORE-MAKE |
| Switch-off Time-Max | 47ns |
| Signal Current-Max | 0.025A |
| Height Seated (Max) | 4.2mm |
| Length | 26.73mm |
| RoHS Status | ROHS3 Compliant |
74HC4351N,652 Overview
This electronic part is conveniently packaged in 20-DIP (0.300, 7.62mm), making it easy to ship abroad. In order to provide high reliability, an advanced packaging method Tube is used. The multiplexer is located in Through Hole. Multiplexers and demultiplexers have a number of circuits 8:1. Operation at a temperature around -40°C~125°C TA. Total terminations are 20. The electronic part provides high-quality output because it has 8 channels. When the electronic component is given a voltage of 6V, it should be turned on and run. There are 20 pins injected into the electronic part body. A 1 circuit is present in this switch device. Use 74HC4351 to search for variants of the digital switches. A analogue multiplexer of this type is a Multiplexer or Switches. Integrated with SINGLE-ENDED MULTIPLEXER analog IC.
74HC4351N,652 Features
8 Channels
-3db Bandwidth: 170MHz
74HC4351N,652 Applications
There are a lot of NXP USA Inc. 74HC4351N,652 Analog Switches & Multiplexers ICs applications.
- Channel Banks
- Sample hold systems
- Intelligent PBX
- Audio/video switches
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Medical Instrumentation
- SONET/SDH ADM
- Optical Applications
- Mechanical reed relay replacement
- Microprocessor Controlled Analog Systems
