74HC4353D,653
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 6V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4353 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Number of Channels | 1 |
| Number of Circuits | 3 |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Voltage - Supply, Single/Dual (±) | 2V~10V ±1V~5V |
| -3db Bandwidth | 170MHz |
| On-State Resistance (Max) | 120Ohm |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Off-state Isolation-Nom | 50 dB |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 3.5pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SPDT |
| Switch Time (Ton, Toff) (Max) | 40ns, 40ns |
| Channel-to-Channel Matching (ΔRon) | 6 Ω |
| Crosstalk | -60dB @ 1MHz |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| RoHS Status | ROHS3 Compliant |
74HC4353D,653 Overview
As the electronic part is packed in 20-SOIC (0.295, 7.50mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. 2:1 is the ratio of multiplexer to demultiplexer circuits. Temperatures around -40°C~125°C TA are extended for operation. In total, there are 20 terminations. A electrical component with 1 channels is capable of high-quality output. An 6V voltage supply should allow the electrical part to be turned on and run. There are 20 pins injected into the electronic part body. SPDT switching circuits are used in these analog switch ics. Circuits number 3 make up this analogue multiplexer. Use 74HC4353 to search for variants of the digital switches. An analog IC with the number SINGLE-ENDED MULTIPLEXER is integrated into this board.
74HC4353D,653 Features
1 Channels
Switch Circuit: SPDT
-3db Bandwidth: 170MHz
74HC4353D,653 Applications
There are a lot of NXP USA Inc. 74HC4353D,653 Analog Switches & Multiplexers ICs applications.
- 65 V DACs
- Avionics and Military Systems
- Fiber In The Loop (FITL)
- Switching Systems
- New designs requiring multiplexer functions
- Cable Modem
- Central office
- Ultrasound
- PDAs
- Microwave transmission systems
