74HC4515D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | Decoder/Demultiplexer |
| Additional Feature | ADDRESS LATCHES |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4515 |
| Pin Count | 24 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 4:16 |
| Polarity | Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 375 ns |
| Family | HC/UH |
| Logic Function | Decoder, Demultiplexer, Demux, Latch |
| Current - Output High, Low | 5.2mA 5.2mA |
| Supply Type | Single |
| Number of Input Lines | 4 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 16 |
| Input Conditioning | LATCHED |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4515D,653 Overview
This is a relatively small item of digital switch that is included in the 24-SOIC (0.295, 7.50mm Width) in order to save space on the board.In this case, it is packaged as Tape & Reel (TR).Mounting is performed using Surface Mount.The multiplexers uses an analog IC Decoder/Demultiplexer as the analog part of the circuit.If the operating temperature is maintained at -40°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 2V~6V supply voltage.Since they are members of the 74HC series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 24 range.The base part number is 74HC4515, which can also be used to find its logic switch related parts.In this case, 5V is the voltage supplied to the multiplexer's system.A component pin count of 24 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.There is a type of supply Single that is employed in this case.A total of 24 pins are configured on this board.The mounting point is Surface Mount.The logic switch object belongs to the family of HC/UH.Avoid unnecessary failures by keeping the supply voltage (Vsup) at 2V.It is advisable to keep the maximum supply voltage (Vsup) at 6V so as to avoid some unnecessary failures.Without external influences, it consumes 8μA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.A voltage level can be inserted into the 4 input lines of multiplexers.There are 16 output lines on the signal source.In addition, it provides improved characteristics compared to ADDRESS LATCHES.
74HC4515D,653 Features
Supplied in the 24-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 input lines
16 output lines
ADDRESS LATCHES
74HC4515D,653 Applications
There are a lot of Nexperia USA Inc. 74HC4515D,653 Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Data bus control
- Textile mills
- Decimal decoder
- High-performance memory systems
- PCIe
- Paper plants
- Arithmetic Logic Units
- Encrypted communications system
- LVDS
