74HC4851D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4851 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 99 ns |
| On-State Resistance (Max) | 195Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4851D,112 Overview
The electrical component comes in 16-SOIC (0.154, 3.90mm Width) packaging, which makes it convenient to ship overseas. High reliability is achieved by using advanced packaging method Tube. A switch device like this is mounted in Surface Mount. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. 16 terminations have been made so far. This electronic part offers high-quality output due to its 8 channels. When a voltage supply of 3V is used, the electronic component should be turned on and run. The electronic part body is injected with 16 pins. The multiplexer consists of 1 circuits. Use 74HC4851 to search for variants of the digital switches. This digital multiplexer has 195Ohm internal resistance. Please refer to the datasheets for 16 pins functions. Multiplexers should not be powered above 6V in normal situations. Digital switch that provides Single power at a cost-effective price. The lowest voltage the electronic part should receive is 2V. The switch device would be able to operate with 2μA current. The voltage required by this switch device is 2V~6V, draining from a single voltage supply.
74HC4851D,112 Features
8 Channels
2μA Supply Current
74HC4851D,112 Applications
There are a lot of Nexperia USA Inc. 74HC4851D,112 Analog Switches & Multiplexers ICs applications.
- DSLAMs
- Central office
- Transmit
- Precision instrumentation
- FTTH
- Intelligent PBX
- Cable Modem
- Signal routing between systems
- Industrial
- Sample-and-hold systems
