74HC4851D,118
| Parameters | |
|---|---|
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4851 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Supply Type | Single |
| Turn-Off Delay Time | 99 ns |
| On-State Resistance (Max) | 195Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
74HC4851D,118 Overview
This electronic part is conveniently packaged in 16-SOIC (0.154, 3.90mm Width), making it easy to ship abroad. The advanced packaging method Tape & Reel (TR) provides high reliability. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 8:1. The operating temperature is extended to around -40°C~125°C TA. In total, 16 terminations have occurred. High-quality output is provided by the electronic component's 8 channels. When the electronic component is given a voltage of 3V, it should be turned on and run. There are 16 pins injected into the electronic part body. A total of 1 circuits make up this switch device. If you are looking for variants of the digital switch, trying search with 74HC4851. An switch multiplexer with 195Ohm internal resistance has a value of 195Ohm. You can find the functions of the 16 pins in the datasheets. It is generally not recommended to supply a voltage higher than 6V to the switch device in normal circumstances. A analog switch ic that has a cost-effective Single supply type. 2V is the lowest voltage that should be fed to the electronic electronic part. 2μA current would be enough for this multiplexer to operate. A voltage of 2V~6V is required for this switch device, which drains from a single voltage source.
74HC4851D,118 Features
8 Channels
2μA Supply Current
74HC4851D,118 Applications
There are a lot of Nexperia USA Inc. 74HC4851D,118 Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Battery Powered Instruments
- Cross Connects
- 65 V DACs
- Channel Banks
- Audio and video switching
- Residential Gateways, Home Gateway/Router
- Microwave transmission systems
- USB 1.1 signal switching circuits
- Fiber to the Home
