Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Weight |
172.98879mg |
Operating Temperature |
-40°C~125°C TA |
Packaging |
Tape & Reel (TR) |
Series |
Automotive, AEC-Q100 |
JESD-609 Code |
e4 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
16 |
Resistance |
195Ohm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Max Power Dissipation |
500mW |
Technology |
CMOS |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
1 |
Supply Voltage |
3V |
Terminal Pitch |
0.65mm |
Base Part Number |
74HC4851 |
Pin Count |
16 |
Number of Channels |
8 |
Number of Circuits |
1 |
Max Supply Voltage |
6V |
Min Supply Voltage |
2V |
Operating Supply Current |
2μA |
Power Dissipation |
500mW |
Propagation Delay |
32 ns |
Turn On Delay Time |
40 ns |
Logic Function |
Demultiplexer, Multiplexer |
Supply Type |
Single |
On-State Resistance (Max) |
195Ohm |
Multiplexer/Demultiplexer Circuit |
8:1 |
Number of Input Lines |
8 |
Current - Leakage (IS(off)) (Max) |
100nA |
Channel Capacitance (CS(off), CD(off)) |
10pF |
On-state Resistance Match-Nom |
2Ohm |
Switch Time (Ton, Toff) (Max) |
78ns, 78ns |
Channel-to-Channel Matching (ΔRon) |
3 Ω |
Voltage - Supply, Single (V+) |
2V~6V |
Length |
5mm |
Width |
4.4mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
74HC4851PW-Q100,11 Overview
The electrical component comes in 16-TSSOP (0.173, 4.40mm Width) packaging, which makes it convenient to ship overseas. High reliability is provided by advanced packaging method Tape & Reel (TR). A switch device like this is mounted in Surface Mount. Multiplexer and demultiplexer circuits have a number 8:1. An extended operating temperature of -40°C~125°C TA degrees Celsius. In total, there are 16 terminations. By its 8 channels, the electronic component provides high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. It is part of the design of the 16 series that this electronic component is included. A total of 1 circuits make up this switch device. 74HC4851 can be used to search for analog multiplexer variants. In this multiplexer, the internal resistance is 195Ohm. Please refer to the datasheets for 16 pins functions. Users should never supply a voltage higher than 6V to a switch device. A analog switch ic that has a cost-effective Single supply type. A low voltage of 2V should be applied to the electronic component. This digital switch can be operated with a current of 2μA. This analog switch requires a voltage of 2V~6V to drain from a single voltage supply. This is one of the Automotive, AEC-Q100 series.
74HC4851PW-Q100,11 Features
8 Channels
2μA Supply Current
74HC4851PW-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HC4851PW-Q100,11 Analog Switches & Multiplexers ICs applications.
- Signal routing between systems
- High speed data transmission line cards
- FTTH
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Voice over IP/DSL – Integrated Access Devices, Smart
- Battery Powered Systems
- Cable PC
- Medical Instrumentation
- Fiber to the Home
- Cable Telephony – NIU, Set-Top Box, Home Side Box