74HC4851PW,112
| Parameters | |
|---|---|
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Supply Current-Max (Isup) | 0.002mA |
| Turn-Off Delay Time | 99 ns |
| On-State Resistance (Max) | 195Ohm |
| High Level Output Current | 25mA |
| Low Level Output Current | 25mA |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Signal Current-Max | 0.05A |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | RoHS Compliant |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4851 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Number of Channels | 8 |
74HC4851PW,112 Overview
The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). High reliability is achieved by using advanced packaging method Tube. It is mounted in the position Surface Mount. There is 8:1 ratio between the number of multiplexers and demultiplexers. The operating temperature is extended to around -40°C~125°C TA. In total, there are 16 terminations. This electronic part offers high-quality output due to its 8 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. As part of the design of the 16 series, this electronic part has been incorporated into the system. It consists of 1 circuits. Search with 74HC4851 if you are looking for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 195Ohm. Datasheets for 16 pin functions are available upon request. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 6V in normal situations. The analog switch ic is of the Single supply type and is cost-effective. It is recommended that the electrical component receives a voltage of 2V. For this multiplexer to operate, 2μA current would be sufficient. Draining from a single voltage supply, this analog switch requires a voltage of 2V~6V.
74HC4851PW,112 Features
8 Channels
2μA Supply Current
74HC4851PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4851PW,112 Analog Switches & Multiplexers ICs applications.
- Private Branch Exchange (PBX)
- SONET
- Digital access cross connects
- Communication systems
- DSUs
- Switching Systems
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
- Medical systems
- Cell phones
- PBXs
