74HC4851PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4851 |
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 3 ns |
| Turn On Delay Time | 95 ns |
| Logic Function | Demultiplexer, Demux, Multiplexer, Mux |
| Number of Inputs | 8 |
| Supply Type | Single |
| Turn-Off Delay Time | 99 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 8:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Time (Ton, Toff) (Max) | 78ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Voltage - Supply, Single (V+) | 2V~6V |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC4851PW,118 Overview
As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Surface Mount is where this multiplexer is located. Multiplexers and demultiplexers have the same number of circuits 8:1. Increasing operating temperature to around -40°C~125°C TA. 16 terminations have been made so far. A high-quality output is provided by the electrical component's 8 channels. Turning on and running the electrical part should be easy with a 3V voltage supply. 16 pins are injected to the electronic part body. A total of 1 circuits make up this switch device. 74HC4851 can be used to search for analog multiplexer variants. This digital multiplexer has 195Ohm internal resistance. Datasheets for 16 pin functions are available upon request. In a normalsituation, users should not supply the switches with voltage higher than 6V. Analogue multiplexers of the Single supply type that are cost-effective. 2V is the lowest voltage the electrical component should receive. In order to operate this switch device, it would need a current of 2μA. Using a single voltage supply, this switch device consumes 2V~6V volts. Operating 8 inputs is required.
74HC4851PW,118 Features
8 Channels
2μA Supply Current
74HC4851PW,118 Applications
There are a lot of Nexperia USA Inc. 74HC4851PW,118 Analog Switches & Multiplexers ICs applications.
- HDTV
- Digital cross connects (DSX-1)
- Avionics test equipment
- Imaging
- Data Acquisition Systems
- SDH
- MP3 players
- Communication systems
- Precision instrumentation
- Wireless Local Loop
