74HC4852D-Q100,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 2 |
| Supply Voltage | 3V |
| Base Part Number | 74HC4852 |
| Pin Count | 16 |
| Number of Channels | 4 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Operating Supply Current | 2μA |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 2Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 39ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switch-on Time-Max | 57.5ns |
| Switch-off Time-Max | 115ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC4852D-Q100,118 Overview
Due to its 16-SOIC (0.154, 3.90mm Width) packaging, the electronic part is convenient for international shipping. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 4:1 represents the number of circuits. Operating temperature around -40°C~125°C TA extended. In total, 16 terminations have occurred. A 4 channel electronic part produces high-quality output. When a voltage supply of 3V is used, the electronic component should be turned on and run. A total of 16 pins are injected into the electrical part body. Multiplexers built on a SP4T switching circuit are built. This multiplexer is composed of 2 circuits. Using the 74HC4852 search parameter, you can discover variants of the switch. It has an internal resistance of 195Ohm. The datasheets for the 16 pins explain the functions. A voltage higher than 6V should not normally be supplied to the switches. The digital multiplexer has a low cost Single supply. In order for the electronic part to function properly, the lowest voltage should be 2V. The switch device would be able to operate with 2μA current. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. From the Automotive, AEC-Q100 series.
74HC4852D-Q100,118 Features
4 Channels
Switch Circuit: SP4T
2μA Supply Current
74HC4852D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC4852D-Q100,118 Analog Switches & Multiplexers ICs applications.
- SDH
- Low-Voltage
- Data Acquisition Systems
- Cell phones
- Cellular phones
- ATM
- Audio signal routing
- RGB switches
- MP3 players
- Relay Replacement
