74HC4852PW,112
| Parameters | |
|---|---|
| Pin Count | 16 |
| Number of Channels | 8 |
| Number of Circuits | 2 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Analog IC - Other Type | DIFFERENTIAL MULTIPLEXER |
| Operating Supply Current | 2μA |
| Power Dissipation | 500mW |
| Propagation Delay | 2.5 ns |
| Turn On Delay Time | 47.5 ns |
| Logic Function | Demultiplexer, Multiplexer |
| Supply Type | Single |
| Turn-Off Delay Time | 100 ns |
| On-State Resistance (Max) | 195Ohm |
| Multiplexer/Demultiplexer Circuit | 4:1 |
| Current - Leakage (IS(off)) (Max) | 100nA |
| Channel Capacitance (CS(off), CD(off)) | 10pF |
| On-state Resistance Match-Nom | 8Ohm |
| Switch Circuit | SP4T |
| Switch Time (Ton, Toff) (Max) | 39ns, 78ns |
| Channel-to-Channel Matching (ΔRon) | 3 Ω |
| Switch-on Time-Max | 57.5ns |
| Switch-off Time-Max | 115ns |
| Voltage - Supply, Single (V+) | 2V~6V |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Resistance | 195Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 500mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC4852 |
74HC4852PW,112 Overview
Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. There is 4:1 ratio between the number of multiplexers and demultiplexers. Extended operating temperature around -40°C~125°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 8 channels. An 3V voltage supply should allow the electrical part to be turned on and run. 16 pins are injected to the electronic part body. A SP4T switching circuit is used to build these analog multiplexers. There are 2 circuits in this multiplexer. Using the 74HC4852 search parameter, you can discover variants of the switch. There is 195Ohm internal resistance in this digital multiplexer. Please refer to the datasheets for 16 pins functions. normally, users should not supply switches with voltages higher than 6V. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 2V. This multiplexer would work with 2μA current. A voltage of 2V~6V is required to drain this analog switch from a single voltage supply. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board.
74HC4852PW,112 Features
8 Channels
Switch Circuit: SP4T
2μA Supply Current
74HC4852PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC4852PW,112 Analog Switches & Multiplexers ICs applications.
- Microwave transmission systems
- Frame Relay Equipment
- FTTH
- Public switching systems
- Channelized and Unchannelized DS3 applications
- Automatic test equipment
- Battery-powered systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
- Precision instrumentation
- Cross Connects
