74HC4852PW,118

39ns, 78ns SP4T 195Ohm DUAL Analog Switches 74HC4852 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)

Manufacturer: Nexperia USA Inc.
Nocochips NO: 554-74HC4852PW,118
Package: 16-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 757
Description: 39ns, 78ns SP4T 195Ohm DUAL Analog Switches 74HC4852 16 Pins 100nA 3V 16-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Max Power Dissipation	500mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	3V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	74HC4852
Pin Count	16
Number of Channels	8
Number of Circuits	2
Max Supply Voltage	6V
Min Supply Voltage	2V
Analog IC - Other Type	DIFFERENTIAL MULTIPLEXER
Operating Supply Current	2μA
Power Dissipation	500mW
Propagation Delay	2.5 ns
Turn On Delay Time	47.5 ns
Logic Function	Demultiplexer, Multiplexer
Supply Type	Single
Turn-Off Delay Time	100 ns
On-State Resistance (Max)	195Ohm
High Level Output Current	25mA
Low Level Output Current	25mA
Multiplexer/Demultiplexer Circuit	4:1
Current - Leakage (IS(off)) (Max)	100nA
Channel Capacitance (CS(off), CD(off))	10pF
On-state Resistance Match-Nom	8Ohm
Switch Circuit	SP4T
Switch Time (Ton, Toff) (Max)	39ns, 78ns
Channel-to-Channel Matching (ΔRon)	3 Ω
Switch-on Time-Max	57.5ns
Switch-off Time-Max	115ns
Voltage - Supply, Single (V+)	2V~6V
Height Seated (Max)	1.1mm
Length	5mm
Width	4.4mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Factory Lead Time	1 Week
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	195Ohm

74HC4852PW,118 Overview

As the electronic part is packed in 16-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Multiplexers like this are mounted in the Surface Mount position. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. The operating temperature is extended to around -40°C~125°C TA. Total terminations are 16. A 8 channel electronic part produces high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. There are 16 pins injected into the electronic part body. These analog multiplexers are built based on SP4T switching circuits. There are 2 circuits in this switch device. Try searching with 74HC4852 if you're looking for variants. A 195Ohm internal resistance characterizes this multiplexer. To find out what the functions of 16 pins are, please refer to their datasheets. Users shouldn't supply more than 6V voltage to the switch device. The digital multiplexer has a low cost Single supply. 2V should be the lowest voltage fed to the electronic component. This multiplexer would work with 2μA current. Using a single voltage supply, this switch device consumes 2V~6V volts. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module.