74HC564N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Supplier Device Package | 20-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 2V~6V |
| Function | Standard |
| Output Type | Tri-State, Inverted |
| Number of Elements | 1 |
| Clock Frequency | 137MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 28ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HC564N,652 Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. As configured, the output uses Tri-State, Inverted. Positive Edgeis the trigger it is configured with. Through Holemounts this electrical part. With a supply voltage of 2V~6V volts, it operates. A temperature of -40°C~125°C TAis used in the operation. The type of this D latch is D-Type. In this case, it is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 137MHz Hz. A total of 1 elements are present. During its operation, it consumes 8μA quiescent energy. This T flip flop has a capacitance of 3.5pF farads at the input.
74HC564N,652 Features
Tube package
74HC series
74HC564N,652 Applications
There are a lot of Rochester Electronics, LLC 74HC564N,652 Flip Flops applications.
- ESD performance
- Registers
- Digital electronics systems
- Set-reset capability
- Power down protection
- CMOS Process
- Data storage
- Single Up Count-Control Line
- Frequency Divider circuits
- Consumer
