banner_page

74HC573DB,112

D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC573 20-SSOP (0.209, 5.30mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74HC573DB,112
  • Package: 20-SSOP (0.209, 5.30mm Width)
  • Datasheet: PDF
  • Stock: 847
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches 74HC Series 74HC573 20-SSOP (0.209, 5.30mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Contact Plating Gold
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-SSOP (0.209, 5.30mm Width)
Number of Pins 20
Supplier Device Package 20-SSOP
Operating Temperature -40°C~125°C
Packaging Tube
Series 74HC
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Voltage - Supply 2V~6V
Base Part Number 74HC573
Output Type Tri-State
Operating Supply Voltage 5V
Number of Elements 1
Circuit 8:8
Polarity Non-Inverting
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Number of Bits 8
Propagation Delay 225 ns
Quiescent Current 8μA
Turn On Delay Time 14 ns
Logic Function D-Type, Latch
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
High Level Output Current -7.8mA
Low Level Output Current 7.8mA
Number of Input Lines 10
Independent Circuits 1
Number of Output Lines 8
Delay Time - Propagation 14ns
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

74HC573DB,112 Overview


It is embedded in the 20-SSOP (0.209, 5.30mm Width) package. It is packaged in the way of Tube. It uses Tri-State as the output. There is a logic type of D-Type Transparent Latch associated with this electrical device. Surface Mount is used to mount this electronic part. With a supply voltage of 2V~6V, it operates. During operation, the temperature is set at -40°C~125°C. 74HC is the series number of this FPGA. The design of this electronic part contains 8 bits. The family it belongs to is 74HC573. The pin configuration of the device is 20. Electronic parts are mounted using the Surface Mount method. It consists of 10 input lines from which an electronic circuit can be built. High efficiency requires a voltage supply of 5V. 8 output lines provide binary equivalents of input lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors. A total of 1 elements make up this object. 8 circuits enable it to achieve high performance. The low level output current is set to 7.8mA. In the high level output current, the value is set to -7.8mA. Lower than 125°C is the recommended operating temperature. The operating temperature should be higher than -40°C. The supply voltage is limited to 6V. In order for the machine to operate, the supply voltage must be 2V.

74HC573DB,112 Features


20-SSOP (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC573 family
20 pins
1 elements

74HC573DB,112 Applications


There are a lot of Nexperia USA Inc. 74HC573DB,112 Latches applications.

  • Shift left with parallel loading
  • Automotive Body Electronics
  • Motor Drives
  • Serial Output Register
  • Hammer
  • Pattern generators
  • Serial Output Data Queuing
  • Display
  • Parallel-to-Serial Data Conversion
  • Ring counter

Write a review

Note: HTML is not translated!
    Bad           Good