banner_page

74HC573PW-Q100,118

D-Type, Latch 2V~6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74HC Series 74HC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Nexperia USA Inc.
  • Nocochips NO: 554-74HC573PW-Q100,118
  • Package: 20-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 574
  • Description: D-Type, Latch 2V~6V 8 Bits Tri-State Latches Automotive, AEC-Q100, 74HC Series 74HC573 20 Pins DUAL CMOS 20-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 20-TSSOP (0.173, 4.40mm Width)
Number of Pins 20
Operating Temperature -40°C~125°C
Packaging Tape & Reel (TR)
Series Automotive, AEC-Q100, 74HC
JESD-609 Code e4
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 20
Terminal Finish Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)
Technology CMOS
Voltage - Supply 2V~6V
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 0.65mm
Base Part Number 74HC573
Pin Count 20
Output Type Tri-State
Operating Supply Voltage 5V
Circuit 8:8
Polarity Non-Inverting
Supply Voltage-Max (Vsup) 6V
Supply Voltage-Min (Vsup) 2V
Number of Ports 2
Output Current 35mA
Number of Bits 8
Propagation Delay 225 ns
Quiescent Current 8μA
Turn On Delay Time 14 ns
Family HC/UH
Logic Function D-Type, Latch
Output Characteristics 3-STATE
Current - Output High, Low 7.8mA 7.8mA
Logic Type D-Type Transparent Latch
Independent Circuits 1
Length 6.5mm
Width 4.4mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant

74HC573PW-Q100,118 Overview


There is an embedded version of it in package 20-TSSOP (0.173, 4.40mm Width). Tape & Reel (TR) is the packaging method. It is configured with an output of Tri-State. This electrical device has the logic type D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. A 2V~6V voltage supply is required for operation. During operation, the temperature is set at -40°C~125°C. This FPGA is part of the Automotive, AEC-Q100, 74HC series. There are 8 bits in this electronic part. The device consists of 20 terminations that are designed to be used in conjunction with it. 74HC573 is the family name of it. The device works with a voltage of 5V for its supply voltage. With 20 pins, it is equipped. It is part of the family of electronic devices called HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. The electronic part is mounted in a way that corresponds to Surface Mount. This device has 2 ports on board, which are all available at the same time. When Vsup reaches 6V, the maximal supply voltage is reached. Ensure that the supply voltage (Vsup) is greater than 2V. As the output current is 35mA, the design flexibility is maximum. High efficiency requires maintaining the supply voltage at 5V. Without external influences, it consumes 8μA quiescent current.

74HC573PW-Q100,118 Features


20-TSSOP (0.173, 4.40mm Width) package
Automotive, AEC-Q100, 74HC series
8 Bits
74HC573 family
20 pin count
20 pins

74HC573PW-Q100,118 Applications


There are a lot of Nexperia USA Inc. 74HC573PW-Q100,118 Latches applications.

  • Display driver
  • Hammer
  • Data acquisition
  • Parallel Output
  • Double bus register system
  • Automotive Infotainment
  • Storage
  • Frequency dividing
  • Counter timers
  • Display

Write a review

Note: HTML is not translated!
    Bad           Good