74HC574PW-Q100,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Ports | 2 |
| Clock Frequency | 133MHz |
| Propagation Delay | 225 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 7.8mA 7.8mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 26ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC574PW-Q100,118 Overview
The flip flop is packaged in a case of 20-TSSOP (0.173, 4.40mm Width). The Tape & Reel (TR)package contains it. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 2V~6V. Temperature is set to -40°C~125°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74HC series. You should not exceed 133MHzin the output frequency of the device. In total, it contains 1 elements. Terminations are 20. The 74HC574 family contains it. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pFfarads. Electronic devices of this type belong to the HC/UHfamily. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 20 pins. There is a clock edge trigger type of Positive Edgeon this device. In this case, the maximum supply voltage (Vsup) reaches 6V. For normal operation, the supply voltage (Vsup) should be above 2V. The flip flop has 2ports embedded within it. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. Quiescent current is consumed by the D latch in the amount of 8μA.
74HC574PW-Q100,118 Features
Tape & Reel (TR) package
74HC series
20 pins
74HC574PW-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC574PW-Q100,118 Flip Flops applications.
- Power down protection
- Asynchronous counter
- Computers
- Functionally equivalent to the MC10/100EL29
- 2 – Bit synchronous counter
- ESD performance
- Safety Clamp
- Clock pulse
- QML qualified product
- Consumer
