74HC590D,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT;REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Frequency | 61MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 230 ns |
| Quiescent Current | 4μA |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| fmax-Min | 26 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC590D,112 Overview
In the 16-SOIC (0.154, 3.90mm Width)package, it is supplied. In order to configure it, it uses 16terminations. Having a voltage supply of 5Vallows it to operate in a highly flexible manner. There are 1 terminations on the device. The total number of component pins is 16. Packaging is based on Tube. To connect the circuit's other components, there are 16pins. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. The 74HCseries is well suited to a number of uses. The logic type of Binary Counter is adopted. In this case, the operating temperature should be set to -40°C~125°C. Having a mounting type of [0], it is suitable for installation. It is able to operate with higher reliability when the supply voltage of 2V~6V is provided. There are 8bits stored in each element of the array. An important feature of this electronic device is [0]. It should be noted that there are more related parts under the 74HC590base part number. In order for it to operate, it requires a supply voltage of 5V . There is a minimum supply voltage (Vsup) of 2V volts. In this case, the frequency is 61MHz Hz. It is possible to provide a voltage up to 6V (Vsup). The device consumes a quiescent current of 4μA volts.
74HC590D,112 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT;REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 61MHz
74HC590D,112 Applications
There are a lot of Nexperia USA Inc. 74HC590D,112 Counters & Dividers applications.
- SQUARE ROOT
- VHF, UHF, FM, AM, etc.
- counting/frequency sy nthesizers-BCD output
- DIVISION
- Up Counters
- Signal gating
- LINEARIZATION
- SQUARING
- Time Out Timer for Consumer-Application Industrial Controls
- Divide-by"N" counters/frequency synthesizers
