74HC590D,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Additional Feature | TCO OUTPUT;REGISTERED OUTPUTS |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC590 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Propagation Delay | 140 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 230 ns |
| Reset | Asynchronous |
| Family | HC/UH |
| Logic Function | Counter |
| Direction | Up |
| Output Characteristics | 3-STATE |
| Logic Type | Binary Counter |
| Number of Bits per Element | 8 |
| Trigger Type | Positive Edge |
| Number of Input Lines | 1 |
| fmax-Min | 26 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 61MHz |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC590D,118 Overview
It is a device supplied in the 16-SOIC (0.154, 3.90mm Width) package. It is configured using 16terminations. The supply voltage of 5V permits it to operate with full flexibility. 16is the number of pins on all components. There is a package in the form of Tape & Reel (TR). To connect the circuit's other components, there are 16pins. The Surface Mountway is used to mount it. In this case, it emerges as a member of the HC/UH family. This device is a member of the 74HCseries and is well suited for a wide range of applications. Binary Counteris selected as the logic type. It is recommended that the operating temperature be set to -40°C~125°C. This device is mounted in the Surface Mountposition. As a result, the device operates more reliably when a supply voltage of 2V~6Vis applied. An array consists of 8bits for each element. In terms of this electronic device, the features provided by TCO OUTPUT;REGISTERED OUTPUTSare of the utmost importance. There are more related parts under the 74HC590base part number. It takes supply voltage of 5V to operate. There is a minimum supply voltage (Vsup) of 2V volts. Typically, the supply voltage (Vsup) is limited to 6V. The current consumed is 4μA when there are no external factors. There are 1 input lines for the input of binary data in the form of on/off signals.
74HC590D,118 Features
Embedded in the 16-SOIC (0.154, 3.90mm Width) package
8 bits per element
TCO OUTPUT;REGISTERED OUTPUTS
Operating supply voltage of 5V
74HC590D,118 Applications
There are a lot of Nexperia USA Inc. 74HC590D,118 Counters & Dividers applications.
- Digital multiplexing and demultiplexing
- ANALOG SIGNAL PROCESSING
- Frequency division
- Clocks
- Time delay circuits
- Divide-by-N counting
- Analog multiplexing and demultiplexing
- DIVISION
- Programmable binary and decade
- Up Counters
