74HC7030D,652
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | REGISTER BASED; BUBBLE BACK 3US |
| HTS Code | 8542.39.00.01 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC7030 |
| JESD-30 Code | R-PDSO-G28 |
| Function | Asynchronous, Synchronous |
| Supply Voltage-Max (Vsup) | 6V |
| Power Supplies | 2/6V |
| Supply Voltage-Min (Vsup) | 2V |
| Memory Size | 576 64 x 9 |
| Clock Frequency | 9.2MHz |
| Supply Current-Max | 0.001mA |
| Access Time | 36ns |
| Data Rate | 33MHz |
| Organization | 64X9 |
| Output Characteristics | 3-STATE |
| Memory Width | 9 |
| Memory Density | 576 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Uni-Directional |
| FWFT Support | No |
| Output Enable | YES |
| Expansion Type | Depth, Width |
| Cycle Time | 108.7 ns |
| Height Seated (Max) | 2.65mm |
| Length | 17.9mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74HC7030D,652 Overview
FIFO memory chip is included in the 28-SOIC (0.295, 7.50mm Width) package.There's a Tube on the package.There is a memory of 576 64 x 9 on the FIFO chip that can be used to store applications and data.It is advisable to regulate the temperature to -40°C~125°C to ensure reliable operation.Mounting type Surface Mount is assigned to the FIFO memory.Powered by a voltage of 2V~6V , it operates on a low supply voltage.The 74HC series contains this memory logic.Memory IC belongs to the 74HC7030 family.An input voltage of 5V results in high efficiency.FIFO means contains 28 terminations.The gadget in FIFOs is self-contained.This part has a memory type of OTHER FIFO .Components normally possess 2/6V power supplies.Additionally, this FIFO memory can be used to generate REGISTER BASED; BUBBLE BACK 3US .It is set to 6V volts for the FIFO memory IC's maximum supply voltage.As a general rule, keep the supply voltage (Vsup) above 2V in order to ensure normal operation.This FIFO memory IC operates at a frequency of 9.2MHz .
74HC7030D,652 Features
576 64 x 9 memory size
74HC series
Best part number of 74HC7030
FIFOs category
Clock frequency of 9.2MHz
74HC7030D,652 Applications
There are a lot of NXP USA Inc. 74HC7030D,652 FIFOs Memory applications.
- Signal processing
- Down-Hole Energy Drilling
- Alarm System
- Microprogramming
- Measurement Equipment
- Network bridges
- Buses
- Firmware loaders
- General Data Collection Applications at Low-Temperatures
- Rate buffers
