74HC73PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | MASTER SLAVE OPERATION |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC73 |
| Function | Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 83MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 27ns @ 6V, 50pF |
| Trigger Type | Negative Edge |
| Input Capacitance | 3.5pF |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74HC73PW,112 Overview
The flip flop is packaged in 14-TSSOP (0.173, 4.40mm Width). The package Tubecontains it. Differentialis the output configured for it. Negative Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. A voltage of 2V~6Vis required for its operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. The type of this D latch is JK Type. In this case, it is a type of FPGA belonging to the 74HC series. It should not exceed 83MHzin its output frequency. A total of 2elements are present in it. Despite external influences, it consumes 4μAof quiescent current. There have been 14 terminations. The 74HC73 family contains it. It is powered from a supply voltage of 5V. There is 3.5pF input capacitance for this T flip flop. A device of this type belongs to the family of HC/UH. Vsup reaches its maximum value at 6V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 2V. In addition, MASTER SLAVE OPERATIONis a characteristic of it.
74HC73PW,112 Features
Tube package
74HC series
74HC73PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC73PW,112 Flip Flops applications.
- Set-reset capability
- High Performance Logic for test systems
- Differential Individual
- Instrumentation
- Computers
- Supports Live Insertion
- Latch-up performance
- Matched Rise and Fall
- Buffer registers
- Registers
