74HC74BQ-Q100,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 82MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC74BQ-Q100,115 Overview
It is packaged in the way of 14-VFQFN Exposed Pad. D flip flop is embedded in the Tape & Reel (TR) package. T flip flop uses Differentialas its output configuration. JK flip flop uses Positive Edgeas the trigger. It is mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. Currently, the operating temperature is -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74HCseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 82MHz. A total of 2elements are contained within it. It consumes 40μA of quiescent The number of terminations is 14. Members of the 74HC74family make up this object. A voltage of 5V provides power to the D latch. Input capacitance of this device is 3.5pF farads. An electronic device belonging to the family HC/UHcan be found here. This electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. There is a clock edge trigger type of Positive Edgeon this device. It reaches the maximum supply voltage (Vsup) at 6V. Normally, the supply voltage (Vsup) should be kept above 2V. For high efficiency, the supply voltage should be kept at 5V. As a result, it consumes 80μA of quiescent current without being affected by external factors.
74HC74BQ-Q100,115 Features
Tape & Reel (TR) package
74HC series
14 pins
74HC74BQ-Q100,115 Applications
There are a lot of Nexperia USA Inc. 74HC74BQ-Q100,115 Flip Flops applications.
- Buffer registers
- Consumer
- ESD performance
- Power down protection
- Buffered Clock
- Digital electronics systems
- Count Modes
- Counters
- Matched Rise and Fall
- Balanced 24 mA output drivers
