74HC74BQ,115
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Clock Frequency | 82MHz |
| Propagation Delay | 44 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 8 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HC74BQ,115 Overview
The flip flop is packaged in a case of 14-VFQFN Exposed Pad. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Differentialas the output. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. Powered by a 2V~6Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~125°C TA. This electronic flip flop is of type D-Type. The 74HCseries comprises this type of FPGA. Its output frequency should not exceed 82MHz Hz. As a result, it consumes 40μA quiescent current. A total of 14terminations have been recorded. Members of the 74HC74family make up this object. The power source is powered by 5V. A JK flip flop with a 3.5pFfarad input capacitance is used here. A device of this type belongs to the family of HC/UH. There is an electronic component mounted in the way of Surface Mount. 14pins are included in its design. This device has the clock edge trigger type of Positive Edge. Vsup reaches its maximum value at 6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. In order to achieve its superior flexibility, 2 circuits are used. For high efficiency, the supply voltage should be set to 5V. There are 4 output lines in this JK flip flop. 8input lines are available for you to choose from. 80μAquiescent current consumed.
74HC74BQ,115 Features
Tape & Reel (TR) package
74HC series
14 pins
74HC74BQ,115 Applications
There are a lot of Nexperia USA Inc. 74HC74BQ,115 Flip Flops applications.
- Data Synchronizers
- Storage Registers
- Dynamic threshold performance
- Storage registers
- CMOS Process
- Matched Rise and Fall
- Supports Live Insertion
- Safety Clamp
- Frequency Divider circuits
- Communications
