74HC74D-Q100,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 82MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HC74D-Q100,118 Overview
14-SOIC (0.154, 3.90mm Width)is the packaging method. As part of the package Tape & Reel (TR), it is embedded. It is configured with Differentialas an output. Positive Edgeis the trigger it is configured with. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. It is at -40°C~125°C TAdegrees Celsius that the system is operating. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74HCseries FPGA. Its output frequency should not exceed 82MHz. A total of 2elements are present in it. It consumes 40μA of quiescent A total of 14terminations have been recorded. JK flip flop belongs to 74HC74 family. An input voltage of 5Vpowers the D latch. Its input capacitance is 3.5pF farads. Electronic devices of this type belong to the HC/UHfamily. It is mounted by the way of Surface Mount. This board is designed with 14pins on it. This device has the clock edge trigger type of Positive Edge. In this case, the maximum supply voltage (Vsup) reaches 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. If high efficiency is desired, the supply voltage should be kept at 5V. It consumes 80μA current.
74HC74D-Q100,118 Features
Tape & Reel (TR) package
74HC series
14 pins
74HC74D-Q100,118 Applications
There are a lot of Nexperia USA Inc. 74HC74D-Q100,118 Flip Flops applications.
- Functionally equivalent to the MC10/100EL29
- Parallel data storage
- Individual Asynchronous Resets
- Convert a momentary switch to a toggle switch
- Registers
- 2 – Bit synchronous counter
- Storage Registers
- Set-reset capability
- Common Clocks
- Latch
