74HC74D,652
| Parameters | |
|---|---|
| Number of Inputs | 8 |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Ambient Temperature Range High | 125°C |
| Height | 1.75mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Output Current | 25mA |
| Clock Frequency | 82MHz |
| Propagation Delay | 37 ns |
| Quiescent Current | 40μA |
| Family | HC/UH |
74HC74D,652 Overview
It is embeded in 14-SOIC (0.154, 3.90mm Width) case. You can find it in the Tubepackage. T flip flop uses Differentialas the output. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 2V~6Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. The type of this D latch is D-Type. The FPGA belongs to the 74HC series. You should not exceed 82MHzin the output frequency of the device. D latch consists of 2 elements. It has been determined that there have been 14 terminations. The 74HC74 family contains this object. A voltage of 5V is used as the power supply for this D latch. This JK flip flop has a 3.5pFfarad input capacitance. It is a member of the HC/UHfamily of D flip flop. The electronic flip flop is designed with pins 14. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. With an output current of 25mA, it is possible to design the device in any way you want. There is 40μA quiescent current consumption by it. The inputs used are 8.
74HC74D,652 Features
Tube package
74HC series
14 pins
74HC74D,652 Applications
There are a lot of Nexperia USA Inc. 74HC74D,652 Flip Flops applications.
- Control circuits
- Automotive
- Bounce elimination switch
- Data transfer
- Reduced system switching noise
- Memory
- Patented noise
- Frequency Dividers
- Latch
- Single Up Count-Control Line
