74HC74DB,112
| Parameters | |
|---|---|
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Clock Frequency | 82MHz |
| Propagation Delay | 300 ns |
| Quiescent Current | 80μA |
| Turn On Delay Time | 14 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
74HC74DB,112 Overview
The flip flop is packaged in 14-SSOP (0.209, 5.30mm Width). The package Tubecontains it. The output it is configured with uses Differential. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 2V~6V volts. In this case, the operating temperature is -40°C~125°C TA. The type of this D latch is D-Type. It is a type of FPGA belonging to the 74HC series. Its output frequency should not exceed 82MHz. It consumes 40μA of quiescent Currently, there are 14 terminations. You can search similar parts based on 74HC74. The D flip flop is powered by a voltage of 5V . There is 3.5pF input capacitance for this T flip flop. The electronic device belongs to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. It is designed with 14 pins. Its clock edge trigger type is Positive Edge. As soon as Vsup reaches 6V, the maximum supply voltage is reached. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. The superior flexibility of this product is achieved by using 2 circuits. In order to achieve high efficiency, the supply voltage should be maintained at 5V. It has 1 output lines to operate. It consumes a total of 80μA quiescent current at any given time.
74HC74DB,112 Features
Tube package
74HC series
14 pins
74HC74DB,112 Applications
There are a lot of Nexperia USA Inc. 74HC74DB,112 Flip Flops applications.
- Test & Measurement
- Counters
- Storage Registers
- Cold spare funcion
- Consumer
- Convert a momentary switch to a toggle switch
- Data storage
- Event Detectors
- Shift registers
- Asynchronous counter
