74HC74DTR2G
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Output Current | 5.2mA |
| Clock Frequency | 28MHz |
| Propagation Delay | 160 ns |
| Turn On Delay Time | 21 ns |
| Family | HC/UH |
| Logic Function | AND, D-Type |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Max I(ol) | 0.004 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 17ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 10pF |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74HC74DTR2G Overview
14-TSSOP (0.173, 4.40mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. In the configuration, Differentialis used as the output. In the configuration of the trigger, Positive Edgeis used. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. A temperature of -55°C~125°C TAis used in the operation. D-Typedescribes this flip flop. In this case, it is a type of FPGA belonging to the 74HC series. You should not exceed 28MHzin the output frequency of the device. During its operation, it consumes 2μA quiescent energy. Currently, there are 14 terminations. Members of the 74HC74family make up this object. Power is supplied from a voltage of 3V volts. Its input capacitance is 10pF farads. It belongs to the family of electronic devices known as HC/UH. Surface Mount mounts this electronic component. A total of 14pins are provided on this board. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. In this case, the maximum supply voltage (Vsup) reaches 6V. Normal operation requires a supply voltage (Vsup) above 2V. Due to its superior flexibility, it uses 2 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. Its output current of 5.2mAallows for maximum design flexibility. To operate, the chip has a total of 1 output lines.
74HC74DTR2G Features
Tape & Reel (TR) package
74HC series
14 pins
74HC74DTR2G Applications
There are a lot of ON Semiconductor 74HC74DTR2G Flip Flops applications.
- Data storage
- Automotive
- Memory
- Reduced system switching noise
- Count Modes
- Registers
- High Performance Logic for test systems
- Single Down Count-Control Line
- Clock pulse
- Computing
