74HC74PW,112
| Parameters | |
|---|---|
| Max Propagation Delay @ V, Max CL | 37ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Clock Frequency | 82MHz |
| Family | HC/UH |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
74HC74PW,112 Overview
14-TSSOP (0.173, 4.40mm Width)is the way it is packaged. There is an embedded version in the package Tube. As configured, the output uses Differential. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In the operating environment, the temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. In FPGA terms, D flip flop is a type of 74HCseries FPGA. You should not exceed 82MHzin its output frequency. A total of 2 elements are present. It consumes 80μA of quiescent There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74HC74. The power source is powered by 5V. Its input capacitance is 3.5pFfarads. In terms of electronic devices, this device belongs to the HC/UHfamily of devices. As soon as Vsup reaches 6V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation.
74HC74PW,112 Features
Tube package
74HC series
74HC74PW,112 Applications
There are a lot of Nexperia USA Inc. 74HC74PW,112 Flip Flops applications.
- Data storage
- Differential Individual
- Cold spare funcion
- Pattern generators
- 2 – Bit synchronous counter
- Memory
- Divide a clock signal by 2 or 4
- Common Clocks
- Shift registers
- Data Synchronizers
