74HC75N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Series | 74HC |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HC75 |
| Pin Count | 16 |
| JESD-30 Code | R-PDIP-T16 |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Circuit | 2:2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Family | HC/UH |
| Current - Output High, Low | 5.2mA 5.2mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 36 ns |
| Trigger Type | HIGH LEVEL |
| Independent Circuits | 2 |
| fmax-Min | 60 MHz |
| Delay Time - Propagation | 11ns |
| RoHS Status | ROHS3 Compliant |
74HC75N,652 Overview
In the 16-DIP (0.300, 7.62mm) package, it can be found as an embedded module. A Tube package is used to package it. In this configuration, the output is set to Differential. In this electrical device, the logic type is D-Type Transparent Latch. The way in which this electronic part is mounted is Through Hole. The voltage supply is 2V~6V. The operating temperature is -40°C~125°C. It is a type of FPGA belonging to the 74HC series. It is designed with 2 bits. In this device, there are 16 terminations. The family 74HC75 includes it. With a supply voltage of 5V, it operates. 16 pins are included. This electronic device is categorized as a HC/UH electronic device. Subcategory FF/Latches contains this part. It reaches a maximum supply voltage (Vsup) of 6V. It is recommended that the supply voltage (Vsup) be greater than 2V.
74HC75N,652 Features
16-DIP (0.300, 7.62mm) package
74HC series
2 Bits
74HC75 family
16 pin count
74HC75N,652 Applications
There are a lot of NXP USA Inc. 74HC75N,652 Latches applications.
- Serial Input
- Buffer/Storage Registers
- Hammer
- Meter applications
- Shift left with parallel loading
- Multi-line decoders
- Flip-flops
- Bus system register with enable parallel lines at bus side
- Motor Drives
- Hammer Device Information
