74HC93N,112
| Parameters | |
|---|---|
| Contact Plating | Gold |
| Mount | Through Hole |
| Package / Case | PDIP |
| Number of Pins | 14 |
| Weight | 9.071847g |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Frequency | 108MHz |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2V |
| Number of Bits | 4 |
| Propagation Delay | 370 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 370 ns |
| Reset | Asynchronous |
| Logic Function | Counter |
| Direction | Unidirectional |
| Number of Bits per Element | 4 |
| Clock Edge Trigger Type | Negative Edge |
| Height | 12.7mm |
| Length | 25.4mm |
| Width | 12.7mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
74HC93N,112 Overview
This device is supplied in the PDIP package. 1 elements are interconnected in wires. In the circuit, there are 14pins that connect other parts. To mount it, use the method of [0]. The array contains elements that store 4bits each. This device contains information in 4bits. The device operates on a supply voltage of [0]. Electrical characteristics remain stable for extended periods of time at [0]. It operates over a specified temperature range with a lower limit generally set to -40°C. Frequency 108MHzdetermines its operation. 6Vis the maximum voltage available to the device. It is possible to operate the device at as low a voltage as 2V. The device consumes quiescent current when it is at 8μA.
74HC93N,112 Features
Embedded in the PDIP package
4 bits per element
Operating supply voltage of 5V
Frequency of 108MHz
74HC93N,112 Applications
There are a lot of Nexperia 74HC93N,112 Counters & Dividers applications.
- Timers
- Timing applications
- POWER COMPUTATION
- Divide-by"N" counters/frequency synthesizers
- Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
- SQUARE ROOT
- TRUE RMS-TO-DC CONVERSION
- Dual Up Counters
- Signal gating
- Programmable decade counters
