74HCT04DB,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-SSOP |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Series | 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74HCT04 |
| Operating Supply Voltage | 5V |
| Number of Elements | 6 |
| Number of Circuits | 6 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Propagation Delay | 19 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 29 ns |
| Logic Function | Buffer, Inverter |
| Number of Inputs | 6 |
| Current - Output High, Low | 4mA 4mA |
| Logic Type | Inverter |
| Max Propagation Delay @ V, Max CL | 19ns @ 4.5V, 50pF |
| High Level Output Current | -4mA |
| Low Level Output Current | 4mA |
| Logic Level - Low | 0.8V |
| Logic Level - High | 2V |
| Current - Quiescent (Max) | 2μA |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT04DB,118 Overview
The part is convenient to ship overseas because it is packed in a 14-SSOP (0.209, 5.30mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. A Inverter logic principle is used to make it work. Voltage 4.5V~5.5V is needed to ensure the part's full functionality. Operating temperature around -40°C~125°C extended. Mounted in Surface Mount. 4mA 4mA is the output current's high and low states. It comes from the 74HCT series. Try searching with 74HCT04 if you're looking for device variants. This logic device is widely used in a wide variety of applications because it is Surface Mount mounted. Datasheets for 14 pin functions are available upon request. Inputs for the part are set to 6. The part has 2μA current flowing through it in the quiescent state. The device consists of 6 circuits. The total number of elements used for operation is 6. The part can function from 5V. In standby mode, there is 2μA maximum current. A supplier offers a package with a value of 14-SSOP. When the temperature is higher than 125°C, the device should not be operated. Based on test statistics, the part's minimal operating temperature would be -40°C. In normalsituation, users should not supply the device with voltage higher than 5.5V. It is recommended to use 4.5V as the lowest voltage for the part.
74HCT04DB,118 Features
Inverter Logic Type
Operating Temperature: -40°C~125°C
Quiescent Current: 2μA
74HCT04DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT04DB,118 Gates and Inverters applications.
- Car
- Overcurrent/Short circuit protection
- DVD
- Television
- Hair dryer
- Solar street light
- Home theater
- Cell phone
- Photovoltaic grid-connected power system
- Communication
