74HCT109D-Q100J
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100, 74HCT |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 81MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 5.2mA 5.2mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 53 ns |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HCT109D-Q100J Overview
It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. As configured, the output uses Differential. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. -40°C~125°C TAis the operating temperature. A flip flop of this type is classified as a JK Type. It belongs to the Automotive, AEC-Q100, 74HCTseries of FPGAs. You should not exceed 81MHzin the output frequency of the device. The list contains 2 elements. This process consumes 4μA quiescents. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The D flip flop is powered by a voltage of 5V . A JK flip flop with a 3.5pFfarad input capacitance is used here. This D flip flop belongs to the family of HCT. In this case, the maximum supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V.
74HCT109D-Q100J Features
Tape & Reel (TR) package
Automotive, AEC-Q100, 74HCT series
74HCT109D-Q100J Applications
There are a lot of Nexperia USA Inc. 74HCT109D-Q100J Flip Flops applications.
- Parallel data storage
- Storage Registers
- Memory
- Data storage
- High Performance Logic for test systems
- Circuit Design
- Single Down Count-Control Line
- Registers
- Safety Clamp
- Balanced Propagation Delays
