74HCT109D,652
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Output Current | 4mA |
| Clock Frequency | 55MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 6V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 53 ns |
| Length | 9.9mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
74HCT109D,652 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). D flip flop is included in the Tubepackage. There is a Differentialoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~125°C TAis considered to be the operating temperature. This logic flip flop is classified as type JK Type. In this case, it is a type of FPGA belonging to the 74HCT series. You should not exceed 55MHzin the output frequency of the device. In total, there are 2 elements. During its operation, it consumes 4μA quiescent energy. A total of 16 terminations have been made. The object belongs to the 74HCT109 family. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 3.5pF farads at the input. This D flip flop belongs to the family of HCT. This board has 16 pins. In this case, the maximum supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. This T flip flop features a maximum design flexibility due to its output current of 4mA.
74HCT109D,652 Features
Tube package
74HCT series
16 pins
74HCT109D,652 Applications
There are a lot of Nexperia USA Inc. 74HCT109D,652 Flip Flops applications.
- Buffer registers
- Storage Registers
- Asynchronous counter
- Consumer
- Instrumentation
- Guaranteed simultaneous switching noise level
- ESD protection
- Buffered Clock
- Power down protection
- ESD performance
