74HCT109DB,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 55MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 13 ns |
| Family | HCT |
| Logic Function | AND, Flip-Flop, JK-Type |
| Current - Output High, Low | 4mA 4mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT109DB,112 Overview
As a result, it is packaged as 16-SSOP (0.209, 5.30mm Width). It is included in the package Tube. Currently, the output is configured to use Differential. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~125°C TAis used in the operation. JK Typeis the type of this D latch. It is a type of FPGA belonging to the 74HCT series. You should not exceed 55MHzin its output frequency. Terminations are 16. This D latch belongs to the family of 74HCT109. A voltage of 5V is used to power it. Input capacitance of this device is 3.5pF farads. In this case, the D flip flop belongs to the HCTfamily. Surface Mount mounts this electronic component. Basically, it is designed with a set of 16 pins. This device has the clock edge trigger type of Positive Edge. Due to its superior flexibility, it uses 2 circuits. For high efficiency, the supply voltage should be kept at 5V. Quiescent current is consumed by the D latch in the amount of 4μA.
74HCT109DB,112 Features
Tube package
74HCT series
16 pins
74HCT109DB,112 Applications
There are a lot of Nexperia USA Inc. 74HCT109DB,112 Flip Flops applications.
- Shift registers
- Event Detectors
- Matched Rise and Fall
- Dynamic threshold performance
- Computing
- Divide a clock signal by 2 or 4
- Single Up Count-Control Line
- Frequency division
- Data Synchronizers
- Balanced 24 mA output drivers
