74HCT109N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT109 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Clock Frequency | 55MHz |
| Family | HCT |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.006 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Propagation Delay (tpd) | 53 ns |
| Height Seated (Max) | 4.7mm |
| RoHS Status | ROHS3 Compliant |
74HCT109N,652 Overview
16-DIP (0.300, 7.62mm)is the way it is packaged. The Tubepackage contains it. T flip flop uses Differentialas its output configuration. The trigger configured with it uses Positive Edge. Through Holeis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. A temperature of -40°C~125°C TAis considered to be the operating temperature. It is an electronic flip flop with the type JK Type. It belongs to the 74HCTseries of FPGAs. You should not exceed 55MHzin its output frequency. The element count is 2 . Despite external influences, it consumes 4μAof quiescent current. A total of 16 terminations have been made. The 74HCT109 family contains this object. Power is provided by a 5V supply. Its input capacitance is 3.5pFfarads. HCTis the family of this D flip flop. The RS flip flops belongs to FF/Latches base part number. There is a 5.5Vmaximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 4.5V. As a result of its reliable performance, this T flip flop is suitable for BULK PACK. In order for the device to operate, it requires 5V power supplies.
74HCT109N,652 Features
Tube package
74HCT series
5V power supplies
74HCT109N,652 Applications
There are a lot of NXP USA Inc. 74HCT109N,652 Flip Flops applications.
- Bus hold
- Single Up Count-Control Line
- Event Detectors
- Modulo – n – counter
- Count Modes
- Data transfer
- Synchronous counter
- Balanced 24 mA output drivers
- Parallel data storage
- ESCC
