74HCT125D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | SO |
| Number of Pins | 14 |
| Packaging | Bulk |
| Published | 2005 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Temperature Grade | AUTOMOTIVE |
| Number of Channels | 4 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 25 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 42 ns |
| Family | HCT |
| Logic Function | Buffer |
| Output Characteristics | 3-STATE |
| Logic IC Type | BUS DRIVER |
| High Level Output Current | -6mA |
| Low Level Output Current | 6mA |
| Capacitance - Input | 3.5pF |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74HCT125D Overview
In the package, you will find a SO-case to contain the op amp ic. Upon delivery, op amp ic is packaged in a Bulk case. The number of terminations is approaching the 14 mark. It is important to remember that this op amp should be operated at a voltage of 5V volts. In total, the buffer amplifier consists of 14 pins. Instrumentation amplifier has 4 channels on it. Using this buffer op amp requires a temperature of at least -40°C. It is recommended that op amp be used at temperatures below 125°C. The operating supply voltage of the buffer op amp is rated at 5V. It is important to keep in mind that the power supply voltage of this electric component is below 5.5V, which is suitable. To keep the buffer amps' supply voltage higher than 4.5V. As a result, linear amplifier's quiescent current is 8μA. This is a 1-bit linear amplifier qualified for many applications and is popular among hobbyists as well as technicians. This buffer op amp has 2 ports for managing a wide range of tasks.
74HCT125D Features
supply voltage of 5V
74HCT125D Applications
There are a lot of Nexperia 74HCT125D Instrumentational OP Amps applications.
- Instrumentation
- Voltage regulation circuit
- Mobile phone
- Portable docking station
- Comparator
- Information processing
- Large motor controllers
- Switching amplifier
- Communication
- Image computer boards
