74HCT138PW-Q100,11
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74HCT138 |
| Pin Count | 16 |
| Number of Outputs | 8 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Propagation Delay | 60 ns |
| Quiescent Current | 8μA |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
| Number of Inputs | 3 |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74HCT138PW-Q100,11 Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .the multiplexers uses an analog IC Decoder/Demultiplexer.By keeping the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.Using a 4.5V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Since they are members of the 74HCT series, they can be used in a wide variety of applications.This configuration includes 16 terminations as part of its basic functionality.There is a base part number 74HCT138 that can be used to locate signal switch's related components as well.The voltage supplied for multiplexer's system is 5V.multiplexer's systemThis turn signal switch has a total of 16 component pins.It is the end of conductors that is represented by GULL WING.There is a type of supply of Single.Currently, it is configured with a 16 pin configuration.As you can see, it is mounted in the direction of Surface Mount.In the HCT family, the logic switch is included.The turn signal switch has 8 outputs designed for operation.No external influence consumes 8μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.It has 3 inputs.
74HCT138PW-Q100,11 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
74HCT138PW-Q100,11 Applications
There are a lot of Nexperia USA Inc. 74HCT138PW-Q100,11 Signal Switches / Multiplexers / Decoders applications.
- Steel plants
- VGA
- Used to connect a single source to multiple destinations
- Analog to digital conversion
- Telephone network
- Electronically controlled engine system
- Make full adder
- Speed control of medern motors
- Communication system
- Frequency multiplexing system
