74HCT138PW,118
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT138 |
| Pin Count | 16 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 3:8 |
| Polarity | Inverting |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 60 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Number of Input Lines | 3 |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Number of Output Lines | 8 |
| Input Conditioning | STANDARD |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
74HCT138PW,118 Overview
In order to save board space, digital switch is located in the 16-TSSOP (0.173, 4.40mm Width).It is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.By maintaining the operating temperature at -40°C~125°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers from 74HCT series can be used for a wide range of applications.As part of its basic configuration, 16 terminations are designed as a part of it.The base part number is 74HCT138, so you can find its logic switch related parts using that number.The voltage supplied for multiplexer's system is 5V.multiplexer's systemA component pin count of 16 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.A total of 16 pins are configured on this board.The multiplexer ic is mounted in the direction of Surface Mount.The logic switch is included into the family of HCT.Without any external influences, it consumes 8μA current of multiplexer ic at all times.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The multiplexers have 3 input lines used to accept voltage levels.There are 8 output lines designed to serve as the source of the signal.
74HCT138PW,118 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
3 input lines
8 output lines
74HCT138PW,118 Applications
There are a lot of Nexperia USA Inc. 74HCT138PW,118 Signal Switches / Multiplexers / Decoders applications.
- War field flying robot with a night vision flying camera
- Microprocessor instruction decoding
- Automatic Monitoring systems
- High-performance memory systems
- Microprocessor memory systems
- Combinational circuit
- A/D converters
- Recording transmission
- Image transmission
- Communication system
