74HCT139PW,112
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Decoder/Demultiplexer |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT139 |
| Pin Count | 16 |
| Number of Outputs | 4 |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:4 |
| Polarity | Inverting |
| Load Capacitance | 50pF |
| Propagation Delay | 50 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 51 ns |
| Family | HCT |
| Logic Function | Decoder, Demultiplexer |
| Current - Output High, Low | 4mA 4mA |
| Supply Type | Single |
| Number of Input Lines | 2 |
| Voltage Supply Source | Single Supply |
| Input Conditioning | STANDARD |
| Height Seated (Max) | 1.1mm |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT139PW,112 Overview
Digital switch is provided in the 16-TSSOP (0.173, 4.40mm Width) for the purpose of saving board space.Tube represents its packaging.For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Decoder/Demultiplexer.The operating temperature will not be affected by external factors when turn signal switch is set to -40°C~125°C.Design engineers have more flexibility when digital controlled switch operates at 4.5V~5.5V voltage.Multiplexers of the 74HCT series can be used in a wide range of applications.It is designed with 16 terminations as part of its basic configuration.The part number for 74HCT139 can be used to find its logic switch related parts as well.The multiplexer's system is powered by 5V volts.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.In this case, the supply type is Single.This multiplexer ic is configured with 16 pins.The mounting is in the way of Surface Mount.The logic switch is a member of the HCT family.As a result, the turn signal switch consists of 4 outputs.Despite not interacting with external factors, it consumes 8μA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A voltage level can be inserted into the 2 input lines of multiplexers.
74HCT139PW,112 Features
Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Operating with the supply voltage of 5V
2 input lines
74HCT139PW,112 Applications
There are a lot of Nexperia USA Inc. 74HCT139PW,112 Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Robotic vehicles
- Solenoid cooling fan
- Video transmission
- Audio transmission
- Enabling different rows of memory depending on address in memory chips
- Memory system of computers
- High-performance memory systems
- Microprocessor input/output systems
- Make full adder
