74HCT151N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2010 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Packing Method | BULK PACK |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT151 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 1 x 8:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Number of Inputs | 8 |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | COMPLEMENTARY |
| Max I(ol) | 0.004 A |
| Prop. Delay@Nom-Sup | 57 ns |
| Propagation Delay (tpd) | 62 ns |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT151N,652 Overview
In order to save board space, digital switch is located in the 16-DIP (0.300, 7.62mm).Tube is the packaging method.Through Hole is the mounting method digital switch ic uses.the multiplexers uses an analog IC Multiplexer.The operating temperature of -40°C~125°C will not be susceptible to external factors.When digital controlled switch operates at 4.5V~5.5V, designers are provided with a greater degree of flexibility.These multiplexers are members of the 74HCT series, which provide extensive application potential.As parts of its basic configuration, 16 terminations are desgined.The base part number is 74HCT151, which is also useful when looking up signal switch's related components.The multiplexer's system is powered by 5V voltage.This turn signal switch has a total of 16 component pins.In the HCT family, the logic switch is included.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.Keeping Vsup at 5.5V will prevent some unnecessary failures.A power supply is provided for mux switch's normal operation of 5V.There are 1 outputs designed for the operation of the turn signal switch.This multiplexer has a total of 8 inputs.The switches package is packaged in accordance with the BULK PACK method.
74HCT151N,652 Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Power supplies of 5V
74HCT151N,652 Applications
There are a lot of NXP USA Inc. 74HCT151N,652 Signal Switches / Multiplexers / Decoders applications.
- Electronically controlled engine system
- Audio transmission
- HD surveillance system
- Speed control of medern motors
- A robotic vehicle with the metal detector
- D/A converters
- Relay
- Idle motor
- Textile mills
- Decimal decoder
