74HCT153N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | Multiplexer |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT153 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Circuit | 2 x 4:1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Family | HCT |
| Number of Inputs | 4 |
| Current - Output High, Low | 4mA 4mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.004 A |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Height Seated (Max) | 4.7mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74HCT153N,652 Overview
It is included in the 16-DIP (0.300, 7.62mm) in order to save board space.Tube represents its packaging.For mounting, digital switch ic uses the method Through Hole.The analog IC used in the multiplexers can be referred to as Multiplexer.In the case of -40°C~125°C, turn signal switch will not be affected by external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4.5V~5.5V.provides digital controlled switch's digital controlled switch'sThe multiplexers can be used for a wide range of applications since they are members of 74HCT series.There are 16 terminations included in its basic configuration.In addition, it also has a base part number of 74HCT153, which can be used to find related parts.The multiplexer's system works with 5V voltage.This turn signal switch has 16 component pins.The logic switch is a member of the HCT family.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4.5V.It is advisable to keep the maximum supply voltage (Vsup) at 5.5V in order to prevent some unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.As part of the operation of this turn signal switch, there are 1 outputs.This multiplexer has 4 inputs.
74HCT153N,652 Features
Supplied in the 16-DIP (0.300, 7.62mm) package
Power supplies of 5V
74HCT153N,652 Applications
There are a lot of NXP USA Inc. 74HCT153N,652 Signal Switches / Multiplexers / Decoders applications.
- Data collection system
- Make half adder
- Home automation system
- Analog to digital conversion
- PCIe
- Enabling block of memory depending on address in memory chips
- Arithmetic Logic Units
- LVDS
- Memory chips
- Solenoid cooling fan
