74HCT173D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 80MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 20 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 4 |
| fmax-Min | 60 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
74HCT173D,653 Overview
The package is in the form of 16-SOIC (0.154, 3.90mm Width). The package Tape & Reel (TR)contains it. This output is configured with Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. -40°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74HCT series. A frequency of 80MHzshould be the maximum output frequency. A total of 1elements are present in it. This process consumes 4μA quiescents. It has been determined that there have been 16 terminations. JK flip flop belongs to 74HCT173 family. Power is provided by a 5V supply. Its input capacitance is 3.5pF farads. It is a member of the HCTfamily of D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. There are 16pins on it. This device has the clock edge trigger type of Positive Edge. Flip flops designed with 4bits are used in this part. High efficiency requires the supply voltage to be maintained at 5V. It is reported that there are 4 input lines. It consumes a total of 8μA quiescent current at any given time. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.
74HCT173D,653 Features
Tape & Reel (TR) package
74HCT series
16 pins
4 Bits
74HCT173D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT173D,653 Flip Flops applications.
- Divide a clock signal by 2 or 4
- Memory
- Individual Asynchronous Resets
- Set-reset capability
- Matched Rise and Fall
- 2 – Bit synchronous counter
- Bus hold
- Load Control
- Synchronous counter
- CMOS Process
