74HCT173DB,118
| Parameters | |
|---|---|
| Height Seated (Max) | 2mm |
| Length | 6.2mm |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1997 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Additional Feature | WITH HOLD MODE |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT173 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Bits | 4 |
| Clock Frequency | 80MHz |
| Propagation Delay | 17 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 20 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 6mA 6mA |
| Max Propagation Delay @ V, Max CL | 40ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 4 |
| fmax-Min | 60 MHz |
| Clock Edge Trigger Type | Positive Edge |
74HCT173DB,118 Overview
The item is packaged in 16-SSOP (0.209, 5.30mm Width)cases. It is included in the package Tape & Reel (TR). There is a Tri-State, Non-Invertedoutput configured with it. In the configuration of the trigger, Positive Edgeis used. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. The operating temperature is -40°C~125°C TA. D-Typeis the type of this D latch. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 80MHz Hz. A total of 1 elements are present. Despite external influences, it consumes 4μAof quiescent current. There are 16 terminations,The 74HCT173 family contains this object. It is powered by a voltage of 5V . This JK flip flop has a 3.5pFfarad input capacitance. Electronic devices of this type belong to the HCTfamily. It is mounted in the way of Surface Mount. This board has 16 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is designed with 4bits. High efficiency requires the supply voltage to be maintained at 5V. It has 4lines. It consumes a total of 8μA quiescent current at any given time. As an additional reference, you may refer to electronic flip flop WITH HOLD MODE.
74HCT173DB,118 Features
Tape & Reel (TR) package
74HCT series
16 pins
4 Bits
74HCT173DB,118 Applications
There are a lot of Nexperia USA Inc. 74HCT173DB,118 Flip Flops applications.
- High Performance Logic for test systems
- Latch-up performance
- Storage Registers
- Digital electronics systems
- Parallel data storage
- Circuit Design
- Clock pulse
- Computing
- Single Down Count-Control Line
- ESD performance
