74HCT174D,653
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2013 |
| Series | 74HCT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74HCT174 |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Load Capacitance | 50pF |
| Number of Bits | 6 |
| Clock Frequency | 69MHz |
| Propagation Delay | 53 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 21 ns |
| Family | HCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 4mA 5.2mA |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| Number of Input Lines | 6 |
| fmax-Min | 20 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74HCT174D,653 Overview
16-SOIC (0.154, 3.90mm Width)is the way it is packaged. There is an embedded version in the package Tape & Reel (TR). In the configuration, Non-Invertedis used as the output. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. A supply voltage of 4.5V~5.5V is required for operation. It is at -40°C~125°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74HCTseries of FPGAs. A frequency of 69MHzshould not be exceeded by its output. A total of 1 elements are present. A total of 16 terminations have been made. This D latch belongs to the family of 74HCT174. The power source is powered by 5V. There is 3.5pF input capacitance for this T flip flop. This D flip flop belongs to the family of HCT. A part of the electronic system is mounted in the way of Surface Mount. There are 16pins on it. This device has the clock edge trigger type of Positive Edge. There are 6bits in this flip flop. The supply voltage should be maintained at 5V for high efficiency. The number of input lines is 6. It consumes 8μA current.
74HCT174D,653 Features
Tape & Reel (TR) package
74HCT series
16 pins
6 Bits
74HCT174D,653 Applications
There are a lot of Nexperia USA Inc. 74HCT174D,653 Flip Flops applications.
- Test & Measurement
- Computers
- Instrumentation
- Storage registers
- Computing
- Safety Clamp
- Registers
- Shift Registers
- Memory
- Latch-up performance
