74HCT174N,652
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Supplier Device Package | 16-DIP |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Series | 74HCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Function | Master Reset |
| Output Type | Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 69MHz |
| Current - Quiescent (Iq) | 8μA |
| Current - Output High, Low | 4mA 5.2mA |
| Number of Bits per Element | 6 |
| Max Propagation Delay @ V, Max CL | 35ns @ 4.5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3.5pF |
| RoHS Status | ROHS3 Compliant |
74HCT174N,652 Overview
In the form of 16-DIP (0.300, 7.62mm), it has been packaged. There is an embedded version in the package Tube. This output is configured with Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. Temperature is set to -40°C~125°C TA. There is D-Type type of electronic flip flop associated with this device. In FPGA terms, D flip flop is a type of 74HCTseries FPGA. There should be no greater frequency than 69MHzon its output. A total of 1elements are present in it. It consumes 8μA of quiescent JK flip flop input capacitance is 3.5pF farads.
74HCT174N,652 Features
Tube package
74HCT series
74HCT174N,652 Applications
There are a lot of Rochester Electronics, LLC 74HCT174N,652 Flip Flops applications.
- Count Modes
- Frequency Divider circuits
- Power down protection
- Parallel data storage
- Latch
- Storage Registers
- Matched Rise and Fall
- Common Clocks
- Frequency Dividers
- Data Synchronizers
